Click on the images below for close-ups...
Dealers or Dealer inquiries click here
WHEEL COVERS 
Boat Wheel Sizes
and Color Chart
Our leather wheel cover turns
a cold, slippery wheel into sailing comfort. And what a great way to bring out your
boat's good looks! Choose from a standard kit or let us cut a custom cover for your
boat's wheel. We offer a full range of colors and textures to match the look of your
boat. For extra cushion, select UV resistant closed cell foam under your leather
wheel cover to pad your wheel. A center marker is also available to mark your
wheel's top dead center position (when your rudder is positioned amidships). Leather
spoke covers (4 to 6 inches long) can be added to match your wheel cover. 
Order Now!
- Hand stitched kit
- Easy installation with
simple stitching instructions
- With or without closed cell
foam backing
- Center markers (on 2-3 ounce
colors only)
- Spoke covers
- Installation available (send
us your existing wheel and we will install the leather
- 2-3 ounce leather
- 4-5 ounce leather
INTERNAL
MAST COVERS & COMPRESSION POST COVERS 
Order Now!
Add beauty to your boat's interior
with leather covers that never lose their looks. Internal mast or compression post
covers come with or without closed cell foam backing. Foam adds thickness, warmth
and noise reduction when installed around the mast.
- Hand stitched kit or Velcro
fastener style
- 2-3 ounce leather
- 4-5 ounce leather
SPINNAKER POLE
COVER Order
Now!
Cover the ends of your pole with our spinnaker pole cover to prevent
abrasion or chafing on the forestay or side stay.
- Hand stitched kit
- 7 ounce leather in blue-gray
SHACKLE LANYARDS
Order Now!
Make your shackle pins and gear easier to grab with our heavy
weight shackle lanyards.
- Made with 8 ounce leather
- Designed to withstand up to 100 pounds of force
- Package of 6
- Colors: brown, tan, white, black
CHAFE GEAR Order Now! 
Increase the life of your lines with protective leather chafe gear.
It fits snugly, so wear is on the leather and not on your line. The leather is
flexible enough to pass freely through a chock. Our standard length is 15 inches
long, so it is easy to align in the chock.
- Two fastening styles: hand
stitched or Velcro
- Custom cut lengths
- Standard kits (15 inches
long)
- 3/8 inch to 1 1/2 inch
diameter lines
- 4-5 ounce leather
- 7-8 ounce leather
RAIL COVERS 
Order Now!
Vertical supports, tension rods, hand
rails and binnacle supports are covered in leather to ensure grip and add warmth and
beauty to your boat. Internal vertical supports and tension rods are attached with
Velcro for fast installation and removal. Dodger rails, binnacle supports and hand
rails are installed with hand stitching for a secure fit.
- Velcro fastener style or
hand stitched kit
- 2-3 ounce leather
- 4-5 ounce leather
TURNBUCKLE COVERS
Order
Now!
Our turnbuckle covers prevent chafing
on sails and sheet lines, ensure durability and give every boat a distinguished
look. Velcro fastened covers are easy to remove and install when the rigging is
pulled or inspected. Hand stitched covers are designed with a tapered end, so they
can slide up the stay for inspection. Use turnbuckle covers on life-line turnbuckles
or back stay adjusters, too.
- Easy installation with
simple instructions
- Two styles: tapered cut for
a single pin turnbuckle, or straight cut with tapered top for a double pin turnbuckle
- Velcro fastened or
hand stitched kit
- Standard kits: small (10
inch), medium (15 inch) and large (22 inch)
- Custom cut
- 2-3 ounce leather
- 4-5 ounce leather
- 7-8 ounce leather
SPREADER BOOTS 
Order
Now!
Keep your sails from chafing or tearing with our
leather spreader boots designed to fit around the spreader tip.
- Custom cut
- Hand stitched style
- 4-5 ounce leather
LIFELINE STANCHION BOOTS 
Order Now!
Our lifeline stanchion boots protect sails from
chafing and dirt. They give your boat a tailored look. Lifeline stanchion
boots are hand stitched in place with waxed polyester thread.
FENDER HOOKS Order Now!
Securing fenders on hand rails can be
difficult and fender line chafe can cause damage to your boat. Boat Leather
provides a metal hook encased in leather with a brass grommet. Simply tie your
fender line through the brass grommet and hang the fender in place. The blue-gray
leather contains no dye and has a suede finish to prevent abrasion.
ADDITIONAL PRODUCTS
BOATLEATHER provides a full line of quality leather products for your
sailing and boating needs: Order Now!
 |
Bulk Leather |
 |
 Leather
chafe gear
|
 Leather cleaning and maintenance kit $5.00
each |
 Leather needles and thread |
 Leather
fender straps $10-$20 depending on size |
 Leather sailing gloves are all
leather with a black nylon web backing. Sizes, sm, med, lrg, ex lrg. Price is $30 or
$25 with a wheel cover order. |
 Leather life line turnbuckle |
and Custom products
Boat
Leather 
sales@boatleather.com
3050
38th Ave W, Seattle, WA 98199 USA Ph: 1-800-468-9110 in WA state:
206-284-9110, Fax: 206-283-7613
Copyright
2007 Boat Leather